Shree Sales

SABO earthing electrode consists of primary earthing electrode (outer pipe) of 99.9% pure copper pipe. The hollow space of the electrode is duly filled with a highly conductive and non-corrosive compound which safeguards the electrode against any corrosion and helps in faster dissipation of the fault or leakage current flowing through the earthing electrode.
Both the ends of the earthing electrode are permanently sealed and the top portion of the copper pipe electrode is compressed under a hydraulic machine to form a lead terminal provided at the top with the 2 holes for connecting to the load/equipment. Since there is no joint on the top portion of the copper pipe earth electrode, the dissipation of the current is ensured to the maximum level and the ohmic value is maintained precisely.
Depending upon the soil conditions, back fill compounds are selected to install along with the earthing electrode. Reslow grounding minerals are selected for normal soil conditions & Carbofill grounding minerals is selected for rocky/sandy soil conditions.
Features:

Easy installation

No maintenance

Faster current dissipation

PIPE IN PIPE EARTHING ELECTRODE ARE BEST EARTHING FOR ANY USES LIKE THAT , HOMES INDUSTRY PROJECTS, 

We are engaged in manufacturing and supplying a wide range of Chemical Electrode Earthing for our clients. These products are manufactured using high grade raw material keeping in mind the needs and demands of our clients. The products offered by us are available at the most rates to our clients. These products are manufactured under the guidance of our professionals. The product that we offer in this category is Earthing Electrode. These products are widely appreciated and are in huge demand across the globe for their efficiency and durability. 

Earthing is the grounding or fastening electrical installations to earth. In electricity supply systems, an earthing system defines the electrical potential of the conductors relative to that of the Earth's conductive surface.

If proper earthing of any electrical equipment is not available then it may result to failure of the equipment as well as causes danger to human life in case got in contact during flow of fault currents. Maximum short circuit current that is possible in any electrical circuit depends upon the transformer capacity and type of load which may come in thousands of amperes. Short circuit capacity of 1000KVA transformer is 20922A or 21KA. However, few ampere current is sufficient for loss of human life. Hence, good and permanent efficient earthing is required for safe discharge of fault currents. 

Installation and maintenance of an effective low resistance earthing system is essential due to the following:

1. Efficiently dissipate heavy fault currents and electrical surges, both in magnitude and duration, to protect equipment being damaged so as to minimize down time, service interruption and replacement cost.

2. Provide a stable reference for electrical and RF circuits at the installation to minimize noise during normal operation.

3. Protection of personnel who work within the area from dangerous electric shock caused due to “step potential” or “touch potential”. 

SAFE EARTHING ELECTRODE WILLBE BEST OF HOME USES AND  INDUSTRIAL PROJECTS. 

Other Details:
Components of Earthing & Bonding system are earth electrode, Earth enhancement material, Earth pit, Main equi-potential earth busbar, Connecting cable, Tape, Strip and all other associated accessories.

GI Electrode:

• Pipe in pipe / Strip in Pipe technology / Pipe in pipe in strip technology
• Hot dipped Galvanised GI pipe ISI marked and strips are used.
• Highly conductive mixture is poured inside the electrode so that inner conductor will practically never corrode and provide lowest possible resistance.

SABO maintenance free earth electrodes are manufactured considering its suitable for all types of soil, terrain, climatic conditions, etc.

These comes in GI / Copper / Copper bonded rods of various dimensions and sizes.

We also manufacture Pipe in Pipe technology, Pipe in strip technology, Dual Pipe and Strip technology, copper bonded steel pipe electrode, copper bonded steel rods and copper electrodes.

Together with SABO-EREC our maintenance free earth electrodes provides very low resistance path for many years.

We also manufacture customized earth electrodes as per customer requirements and design.

DUAL PIPE GI EARTHING GOOD FOR SOLAR PROJECTS.

WE ARE MANUFACTURE OF STRIP IN PIPE EARTHING ELECTRODE IN ALL TYPE EARTHING. AND QUAILTY SOO GUD

Description:
These are made of dual pipe, Flat in Pipe, Single Pipe technology. Inner space is filled with highly conductive corrosion resistant crystalline mixture(CCM) which provides low earth resistance during all seasons.

Specifications:
Other Details:
G.I.Conductor (outer pipe) and secondary G.I.Conductor (inner - pipe/Strip) galvanization is 80 – 100 microns.The secondary Conductor is inserted inside the primary Conductor. The space between the primary and the secondary electrode is duly filled with a highly conductive and non-corrosive compound which safeguards the electrode getting corrode over a long period of time under
the soil. All measurement are in MM, PC = Primary Conductor & SC Secondary Conductor

Earthing Installation Procedure:

• Dig an earth pit of 125 - 150 mm dia of required depth.
• Wet the side walls of the earth pit & soil surrounding it & allow water to settle down.
•  Now make thick paste of SABO back-fill compound by mixing 3kg compound with 2 litres of water.
• Pour the paste inside the earth pit and place earth electrode in the centre of the pit.
• Now again make paste of SABO back-fill compound by mixing 5kg compound with 5 litres of water and pour inside the pit. Repeat the process till complete pit gets covered with compound.
• Care should be taken while mixing the compound that no debris or plastic or air gap remains in the mixture.
• Place SABO earth pit cover at the top of the earth pit in such a way that its top level is same as Ground Level.
• Measure the earth resistance after couple of days once the compound gets set.
• At locations where desired earth resistance is not achieved by single earth pit, then multiple earth pits should be installed at a distance of 3m from each other and connected together by suitable strip.This interconnecting strip should be buried 500 mm below the ground level for interconnection & covered by SABO backfill compound paste.

COPPER EARTHING ELECTRODE WILLBE BEST EARTHING FOR ANY PROJECTS.   COPPER WILL BE 99.9 % IN ELECTRODE

We are engaged in offering a quality approved array of Galvanized Iron Pipe Electrode. The Galvanized Iron Pipe Electrode we offer is widely demanded amongst the clients for its availability in various sizes and specifications. Moreover, one can get these products at reasonable rates.

WE ARE MANUFACTURE OF CHEMICAL EARTHING ELECTRODE AND ALL TYPE EARTHING AVAILABLE. 

we, are certified in CPRI,NABL,SIGMA

Other Details:
We offer our clients a wide range of Earthing Electrode. These products are mainly used to improve conductivity of the earth electrode and ground contact area. We manufacture these products using high grade raw material. The Chemical earthing manufactured by us are available at the most affordable rates to our clients.

Listed below are the varied features of these products:

• High conductivity
• Resistivity Improver
• Non-corrosive in nature
• Suitable for installation in dry form or in a slurry form
• Maintenance free and in its set formÂ, maintains constant earth resistance with time
• Does not dissolve, decompose or leach out with time
• Shall not require periodic charging treatment nor replacement and maintenance
• Suitable for any kind of electrode
• Does not pollute the soil or local water table and meets environmental friendly requirements for landfill
• Does not cause burns, irritation to eye, skin etc